Everything you need to get started: motor, churning paddle, mixing bowl, control panel, base, and two (2) rolled ice cream paddles.

Let the appliance sit upright for at least 2 hours before first use. This allows the internal cooling system to settle after transport, ensuring optimal performance.

The appliance uses a built-in compressor to chill and freeze your mixture while automatically churning it to the correct consistency.

Smart programs control time, temperature, and movement so you don’t have to adjust manually.

You can make:

• Ice Cream: Creamy, traditional texture.
• Gelato: denser with a smoother mouthfeel.
• Sorbet: fruit-based, dairy-free.
• Rolled Ice Cream: spread on the cold plate and shaped into rolls.
• Non-Dairy: made with plant-based milks like oat, almond, coconut, or soy.
• Mix Mode: incorporates toppings or re-mixes texture.

No! The built-in compressor eliminates the need for pre-freezing bowls or ingredients. You can start instantly.

Very! Just add your ingredients, select a program, and the appliance handles both freezing and churning automatically.

Rolled ice cream is the only program with a manual process, requiring you to spread, chop, and roll the mixture using the included paddles.

Most programs take about 20 minutes to produce a soft-serve consistency for 1 pint. Making 2 pints will take longer.

Timing may also vary slightly depending on ingredient temperature, composition, and selected function.

In addition to classic ice cream, you can prepare gelato, sorbet, frozen yogurt, non-dairy desserts, rolled ice cream, and fully customized recipes with mix-ins.

Absolutely! Use plant-based milk alternatives such as almond, oat, coconut, or soy in place of dairy.

The Non-Dairy program is designed to handle these variations.

Yes! Mix-ins can be added during the churning process or incorporated using the Mix program for even distribution.

You have three options:

• During the final 3 minutes of a program
• Using the dedicated Mix program after churning
• Manually during the Keep Cool stage

This timing helps maintain texture while evenly distributing ingredients.

• Mixing Bowl: Up to 4 cups (2 pints) of liquid mixture
• Cold Plate: Up to 2/3 cup of mixture

Do not exceed these limits. The mixture expands during freezing and churning, and overfilling can impact texture and performance.

The InstantChill™ Ice Cream Maker can produce up to 2 pints of finished product per batch.

The result for the Ice Cream program will be a soft-serve consistency immediately after the cycle ends. Textures and consistencies will vary per program.

For a firmer texture, transfer to a freezer-safe container and freeze further.

Common causes include:

• Ingredients that are too warm at the start
• Recipes with high sugar or alcohol content
• Insufficient churn time

To fix: run the cycle longer or freeze the finished product to firm it up.

This can happen if:

• Ingredients were too warm
• The bowl was overfilled
• Incorrect program/settings were used

Try adjusting your inputs and allowing additional time.

Ice crystals form when there is excess water content in the mixture. Homemade ice cream also tends to have less air than commercial versions, which can affect texture.

If frozen too firm, let it sit at room temperature for 5–10 minutes before serving.

Before attaching, make sure the cold plate and the bottom of the mixing bowl are clean and completely dry.

Place the mixing bowl onto the Cold Plate on the Base, with the handles aligned diagonally, with handle on the right side closer to the Control Panel.

When properly installed:

• The bowl will not shift or wobble
• The motor will only activate once alignment is correct

We recommend transferring your finished ice cream to a separate airtight container and storing it in the freezer for best results.

Do not place the mixing bowl in the freezer. This can make the ice cream difficult to remove and may impact the bowl’s performance. Use a freezer-safe container instead.

• Wash removable parts (bowl, paddle, lid) with warm, soapy water
• Wipe the base clean with a damp cloth
• Dry all components thoroughly before reassembling
• Do not submerge or rinse the motor.

The motor should never be washed in water. Please use a dry cloth to wipe it clean if necessary.

You will hear some sound during operation due to the compressor and churning mechanism. This is normal and comparable to a quiet countertop appliance.

It won’t ever disrupt your conversations or what’s on TV.

It has a footprint similar to a compact stand mixer, making it suitable for most kitchen countertops.

Always store the unit upright on a flat, level surface. This protects the internal cooling system and prevents performance issues the next time you use it.

These components are built into the internal structure of the appliance (exact locations to be specified). Do not cut, pierce, or crush any part of the unit. Damaging these areas can lead to fire hazards, explosions, or environmental harm.

Of course! It gives you full control over ingredients, flavor, and texture, while letting you make fresh desserts on demand without preservatives or additives.

You can select between English and French.

1. When the display shows OFF or “-- --”, press and hold Start/Pause and Cancel for 3+ seconds to enter language selection mode.

2. Press the Start or Cancel buttons to toggle between language options

3. Press both Start and Cancel buttons within 10 seconds to confirm.