Instant Pot Anti-Block Shield 2 Designs

Instant Pot 7 In 1 Duo 60 anti-block shield has 2 designs, oval and round.

The anti-block shield fits very securely.  To remove, try a rubber jar opener to achieve a firmer grip.  Grip lid securely.  Push on the side and pull out.

The anti-block shield should be removed and cleaned following each meal preparation, especially for meals that may splatter during preparation.

48 replies
  1. Shary
    Shary says:

    This is the second day I have had my Instant Pot and it is now being used the fourth time. I love it. But your engineers have created a wonderful product, but engineers are known for not communicating. I have spent the night before last and yesterday just looking things up on the internet and reading the instruction book that came with my DUO60 trying to find out how things work. I have used a regular pressure cooker for years. Would you please get a teacher to write up your instructions, a person who knows how to communicate some new to people without any knowledge. I have friends with Instant Pots who don’t use them, I am sure because your instructions are so poor. Since I have been a commercial cook for a retreat center I know how to cook. Since I have used a pressure cooker for over 50 years I understand pressure cooker cooking. I can’t imagine how people without that kind of background can understand how to use your wonderful Instant Pot. I know I will use mine a lot, I just wish other people could too.

    Reply
    • Sorley Oneil
      Sorley Oneil says:

      Hello,

      We would like to thank you for your feedback.

      It is customers like yourself that allow us to improve with your comments. We will have this feedback passed along to the appropriate parties to consider.

      Thank you again for your time and please do feel free to reach out again at any time.

      Kind Regards,
      Sorley

      Reply
  2. Monica M
    Monica M says:

    I have design 1 and at the beginning, the anti block shield was easy to install, now it won’t stay in place not matter what I try. What should I do?

    Reply
  3. Eddie King
    Eddie King says:

    Very easy to take off, just add pressure with your thumb and it pops off. Why so much water has to be used, 16oz. ????????

    Reply
  4. Peter
    Peter says:

    help- what does this do? It is not mentioned in the guides?
    do I have to remove ant clean. I am not using the pressure cooker yet just saute-1st time
    TY Peter

    Reply
    • mjun
      mjun says:

      Hi Peter,
      The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation.

      Reply
    • mjun
      mjun says:

      Hi Deborah,
      The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation.

      Reply
  5. Audrey
    Audrey says:

    In design 2, like my pot, there is a little silicon cover over the little purple thing in the photo. Does that cover come off or stay on during cooking?

    Reply
    • mjun
      mjun says:

      Hi Audrey,
      The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. The anti-block shield needs to remain on the lid especially during cooking. It is recommended to be removed and cleaned following each meal preparation.

      Reply
    • mjun
      mjun says:

      The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation.

      Reply
  6. Sherri
    Sherri says:

    I just got one of these pots for christmas. what is the anti block shield for? do you have to use it to run the machine? I am over whelmed reading the instructions……..

    Reply
    • mjun
      mjun says:

      Hi Sherri,
      The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation. If you need additional help please contact support at: https://support.instantpot.com/

      Reply
  7. Aleen Caplan Yamasaki
    Aleen Caplan Yamasaki says:

    My lid has what looks like design 2 but in the manual it seems that is label exhaust valve and that there something else that I don’t see called and anti block shield.

    Reply
    • mjun
      mjun says:

      Hi Aleen,
      The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation. If you need additional help please contact support at: https://support.instantpot.com/

      Reply
    • mjun
      mjun says:

      Hi D,
      It can be difficult to remove when your pot is still new, however, we do have some suggestions that should help you to remove it.
      1. Try gripping your shield and then twisting and pulling up at the same time.
      2. Use a wet paper towel or use any kind of rubberized glove to assist you with gripping the metal piece.
      3. Try holding the lid like a steering wheel. Using your thumbs for leverage, press firmly against the side of the shield until it pops off.
      The shield is held on by several prongs underneath that hold it by tension, and it is meant to pop off of these prongs.

      Reply
  8. Vivian Roberts
    Vivian Roberts says:

    So the anti block shield needs to remain IN PLACE for cooking?? Correct? Then remove it to clean it? Instructions in the box and videos are very confusing. If I’m seeing correctly the website Video’s on are showing the anti block shield off during cooking.
    Thanks

    Reply
    • mjun
      mjun says:

      Hi Vivian,
      You need to leave the anti-block shield in place. The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation.

      Reply
  9. Marilyn Alm
    Marilyn Alm says:

    I don’t know what this part is. The pictures in the manual are too small to see, even with a magnifying glass. I am trying to set my Pot up, and the directions make no sense because I do not know what the part IS.

    Was it installed before the Pot was shipped? There is NOTHING to tell me.

    Reply
      • Gary Aldridge
        Gary Aldridge says:

        Marilyn’s question was. In part, does the IP60 come with the shield already installed or does it come separate and need to be installed? On mine, the shield is round and is already installed. The instructions.
        however, call for an oval shield to be installed by the owner. Not helpful.
        ,

        Reply
        • mjun
          mjun says:

          Hi Gary, thanks for the clarification. Confirming that the Anti-Block shield comes already installed. It isn’t separate. I’ve will pass along the information to our team regarding the instructions stating something different. Thank you

          Reply
          • Gregory Sandoval
            Gregory Sandoval says:

            Yes, this is VERY confusing. I HIGHLY recommend you take the time to update this FAQ as well which asks specifically about this issue.
            https://support.instantpot.com/article_front/view/detail.php?aid=16

            TO CLARIFY: The issue is that the user manual for the Duo clearly states on page 6 instructions for installing the Anti-block shield and the illustration shows it is a separate part. The fact is it is ALREADY installed and not a MISSING part which is why the FAQ above was asked.

            This is my first experience with your product. I am already annoyed and frustrated that your manual and instructions are outdated and unclear. Also it is not helpful to have your representatives posting canned descriptions of the part and its purpose and not addressing the user confusion.

          • mjun
            mjun says:

            Hi Gregory,
            Thank you for your feedback. After reviewing your comment I’ve provided your feedback and information to the team. Our goal is to ensure we provide clear information and instructions. We are sorry for the inconvenience and appreciate you taking the time to respond. Confirming the Antiblock shield comes installed in the Instant Pot. We are working on improving the information we provide, thank you for your patience.

        • mjun
          mjun says:

          Hi Stephanie, This post is to indicate a newer anti-block shield. This is located on the underside of the lid. The anti-block shield is part of the safety mechanism Anti-Blockage Vent which prevents food debris from blocking the vent. It is recommended to be removed and cleaned following each meal preparation.

          Reply
      • Gregory Sandoval
        Gregory Sandoval says:

        I totally agree. A video would be helpful vs. vague instructions of “push on the side and pull out”. Push what? The shield is ROUND and does not have a “SIDE” to push on…

        Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply to Stephanie Urry Cancel reply

Your email address will not be published. Required fields are marked *